AirTouch™ F30i Comfort
Our softest full face mask yet
Where fabric meets innovation
Meet AirTouch F30i Comfort, a full face mask that brings soft fabric to both the cushion and frame, thoughtfully designed for a soft, gentle¹ feel on your skin and a comfortable night’s sleep.¹
Frequently asked questions
AirTouch F30i Comfort is available through different channels depending on your country, including healthcare professionals and, in some markets, Resmed’s online stores and retail stores. Prices and reimbursement options vary by location. For information on availability, pricing, and reimbursement in your area, please speak with your healthcare professional.
You can reach out to our customer service. They can guide you towards the right support for the issue you’re experiencing. Getting used to a mask can be challenging, and there may be a different mask option that better suits your personal comfort needs!
The AirTouch F30i fabric cushion can be cleaned in the same way as silicone cushions4.
After each use: Cushion, QuietAir vent
Weekly: Headgear, frame and elbow
Facial oil and dirt can easily build up on your mask parts when they’re not cleaned properly, which may contribute to skin irritation. The good news? Cleaning your CPAP mask doesn’t take long, so working it into your morning routine should be a breeze.
HOW TO CLEAN YOUR MASK
Supplies you’ll need to clean your mask:
- Sink or tub
- Warm, drinking-quality water (30°C)
- Mild liquid detergent
- Towel
Step-by-step cleaning tips:
- Unplug your CPAP machine from the power source and disconnect your mask/tubing from your machine.
- Disassemble your mask:
- Undo the fastening tabs on the upper headgear straps and pull the headgear from the frame. Keep the magnetic clips attached to the lower headgear straps. After detaching the headgear, close the fastening tabs to prevent them from damaging the fabric sleeves when handling.
- Squeeze the side buttons on the elbow and detach from the frame.
- Grip the frame connector and lift to unclip the frame from the cushion. Repeat on the other side.
- Soak the components in warm water with a mild liquid detergent. Ensure that there are no air bubbles while soaking.
- Hand wash the components with a soft, non-metallic bristle brush (eg, soft bristle toothbrush). Pay particular attention to the vents in both cushion and elbow. For the cushion, hand wash only without a bristle brush.
- Thoroughly rinse the components under running water. If the sleeve on the frame becomes twisted, it can be repositioned when wet.
- Squeeze the fabric components to remove excess water.
For the QuietAir vent, shake to remove any excess water. - Leave the components on the towel to air dry out of direct sunlight.
Refer to the product user guide for complete instructions.
Ozone or UV light products have not been validated for use with the mask.
Use of ozone or UV light products may discolor or damage a Resmed mask during the Resmed limited warranty period and that will not be covered. Discoloration or damage of Resmed masks are only covered during the limited warranty period if they occur upon initial unpackaging.
Different parts require replacement at varying intervals. Taking care of your CPAP equipment is important, especially those parts which can be affected by dirt, oil and residue from your skin.
Replacing your CPAP equipment regularly can help to improve your sleep quality and get more out of your therapy. Your sleep clinic may offer CPAP mask resupply programs, so you automatically receive new masks and accessories on a schedule tailored to your clinical needs. Just ask your sleep clinic for details.
PROMOTIONAL MATERIAL – CE-marked medical device (CE0123). Manufacturer: Resmed. Local contact: Resmed. Please refer to the instructions for use for relevant information related to any contraindications, warnings and precautions.
*The mask contains magnets that may interfere with certain implants or medical devices. Please refer to the User Guide for complete information, including magnet contraindications and warnings.
**This testimonial is a genuine and documented account of the individual’s response to treatment.
Outcomes and results may vary, and this individual’s response does not provide any indication, warranty or guarantee that other people will have the same or a similar experience.
References
- Resmed external clinical study of 33 patients conducted between 22/06/2023 and 17/07/2023.
- Resmed internal study AirTouch F30i Fabric Moisture Wicking and Breathability Claims. Data on file; ID A5636924
- Declared dual-number noise emission values in accordance with ISO4871:1996 and ISO3744:2010. A-weighted sound power level (with QuietAir vent ring) at a distance of 1 m, with uncertainty of 3 dBA. Refer to AirTouch F30i user guide.
- Refer to AirTouch F30i Comfort user guide
Content last updated: 11/2026


